ThermoFisher Scientific Thermo Scientific iCE 3000 Series, Руководство по предварительной установке

Страница: 13 / 42

Thermo Scientific iCE 3000 Series Pre-Installation Requirements Guide (P/N 9499 500 30031, Version 1.6) 2-1
Chapter 2
Introduction
This manual is designed to help ensure that your iCE 3000 Series AA
spectrometer will be installed efficiently and will be able to meet your
requirements quickly and completely.
It will minimize installation time if the services and facilities detailed
here are available before the equipment is delivered.
Properly installed and maintained, your system will provide you with
years of reliable service. Inform your local Thermo Fisher Scientific
organization what aspects of support are most important to you, and a
tailored agreement can be provided to prolong the life of your
instrument. Contact details for your local support office can be found
on
www.thermofisher.com .
This guide describes the environment and the resources required at the
installation site of the iCE 3000 Series AA spectrometer and associated
equipment. Safety requirements for the installation are also detailed.
The choice of an operating site for the instrument will be influenced by
local considerations, for example ease of access and availability of
electrical power.
Logical planning of the installation can save both time and money. The
objective of this guide is to provide information that will enable the best
site to be chosen and to highlight the essential requirements.
If further information or advice is required, contact your local Thermo
Fisher Scientific representative. A list of Thermo Fisher Scientific
organizations and agents can be found on
www.thermofisher.com .
Installation of the system will include some familiarization training.
However, comprehensive method development and software training
will require additional training that should be ordered separately.
The installation of all services must comply with the appropriate rules
and regulations required by the local authorities responsible for those
services in the workplace at the installation site. An installation
engineer is not responsible for the fitting, or compliance of the
facilities, or services.