ThermoFisher Scientific QuantStudio 1 Скачать руководство пользователя

Страница: 31 / 110

Options

Description

Calibrations

• Perform calibrations

–

ROI and Uniformity

–

Dye

–

Custom

(including Background calibration)

• View calibration history and set calibration reminders in

History and Reminders

RNase P Verification

Perform instrument performance verification using an RNase P plate.

Self Verification Test

Check the instrument hardware functions.

Log

View and export

Instrument Run Log

Backup / Restore

• Backup the instrument

[1]

• Restore an instrument backup

Ship Prep Mode

Place the instrument in a safe state for moving or long term storage.

Run History

—

Displays the instrument runs and whether the EDS file for the run was transferred.

Touch a run to view the details or to transfer or delete (Administrator only) the EDS file.

Manage Users

(Administrator only)

Enable only signed-in users to access the instrument for any task, including accessing

Settings

. Enabling this feature disables the guest profile access to the instrument.

Note:

Instrument runs must be started from the desktop software, and actions during

an instrument run are automatically logged to the guest instrument profile (even if a
user was signed into the instrument).

Sign Out Timer

(Administrator only)

Set the time length of inactivity before a user is automatically signed out.

Manage Profiles

(Administrator only)

Access the profile information for the instrument.

[1]

Also available to standard and guest instrument profiles.

Manage instrument settings

In the home screen, touch

Settings

Instrument Settings

to access the following functions.

“Manage the instrument name (Administrator only)”

on page 32

“Enable Sleep Mode”

on page 32

“Set the idling temperature for the heated cover”

on page 32

“Configure the network drive”

on page 32

Chapter 3

Configure the instrument and manage instrument profiles

Manage instrument settings

QuantStudio

™

1 Plus Real-Time PCR System Installation, Use, and Maintenance Guide

Содержание QuantStudio 1















































































































Результаты поиска

Содержание QuantStudio 1

Отзывы:

Похожие инструкции для QuantStudio 1

Бренды по названию

Популярные бренды

ThermoFisher Scientific QuantStudio 1, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание QuantStudio 1

Отзывы:

Похожие инструкции для QuantStudio 1

Бренды по названию

Популярные бренды