One Lambda, Inc. | A Thermo Fisher Scientific Brand
Micro SSP Gel System User Manual
TDX-OLI-DMR-PS-0619 Rev. 02
12
Electrical Safety Precautions
Refer to the power supply manual before use.
Protect the Micro SSP Gel System and power supply from electronic surges by connecting your
power supply to a surge protector.
Place the power supply close to the Cover with which it is to be connected. Be sure to place the
power supply in a safe, dry location with all the controls accessible.
First connect the power supply to the mains outlet. Turn on the power supply and set the voltage
according to kit product insert. Turn off the power supply and connect the red lead to the voltage
output and the black lead to the common/ground of the power supply.
Place Cover onto Gel System as described in instructions.
Be attentive of any evidence of leakage from the Gel System.
If any leakage is detected,
immediately turn off Power Supply.
Once finished, remove the Cover, turn off power supply, return voltage setting to zero, and
disconnect leads from the power supply.
!
CAUTION
: Do not expose the Micro SSP Gel System to open flames.
Chemical Safety Precautions
Read the Safety Data Sheets (SDS) for all of the chemicals that will contact the Gel System, refer
to product inserts for kits used.
Always wear the required personal protective equipment (PPE) as necessary.
Handle the Gel System components with caution after they have contacted hazardous chemicals.
Environmental Range
Indoor Use
Operational Temperature: 15-30°C (59-86°F)
Operational Relative Humidity: 40-70%
Storage and Intermittent Use: System is clean and is stored within the temperature range of 5-40°C (41-
104°F)
Transportation: Ship at ambient temperature only
Recommended Power Supply Specifications
Complies with local regulations, 18W per number of Gel Systems being run concurrently, 150vDC output,
well maintained according to manufacturer’s recommendation.
