ThermoFisher Scientific HERASAFE 2030i Series, Руководство по эксплуатации

Страница: 61 / 173

Herasafe 2030i / Maxisafe 2030i
50155215 | 51
Operation |
Chapter 6
Startup Mode
Figure 35 shows the Main Screen while the unit is starting up. The following startup
screen shows what happens when the “AutoStart”
or “Fan” button is tapped: The
screen shows alerts for the air barrier because the airflow speeds are not up to speed yet.
Figure 35 Main Screen - Unit starting up
The symbol graph shows that the window is opened to the working position, and the
animated yellow arrow and air barrier symbols indicate that the airflow is not ready. The
three status indicator boxes show:

a green checkmark icon in the window status box to indicate that the window is
ready, but

yellow “Timer” icons with rotating hands show in the Downflow and Inflow boxes,
signifying that the airflows are not up to proper speed yet.
Figure 35 shows a typical startup mode example for “AutoStart”, with the “Lights”, “Fans”,
and “Power receptacle” buttons already enabled (see “Programs” on page 86 for more
details). If enabled in AutoStart, the “Gas” button
may come on later when the airflows
are up to speed.
Standby Mode
Figure 36 shows the Main Screen in standby mode.
Figure 36 Main Screen - Unit in Standby
NOTE When the operational downflow and inflow speeds are reached, the
yellow timers are replaced by green checkmark icons.