ThermoFisher Scientific HERASAFE 2030i Series, Руководство по эксплуатации

Страница: 59 / 173

Herasafe 2030i / Maxisafe 2030i
50155215 | 49
Operation |
Chapter 6
Figure 31 Buttons on the Control Panel
When operating the “Close window” and “AutoStop” buttons , you must tap and
hold the button until the window is closed. This is a safety feature.
To aid users in this gesture, the tooltip-style bubble shown in Figure 32 is displayed on
screen when you press either button.
Figure 32 Tooltip Bubble over “Close window” Button
Main Navigation Bar (Region R3)
The Main Navigation Bar (in Screen Region R3) holds icons for all major settings of the
Herasafe 2030i and Maxisafe 2030i biological safety cabinets.
The Main Navigation Bar is visible at all times on all screens.
The “Autostop” button stops the unit immediately, closing the
window and leaving only a user-selected set of functions
enabled, as previously selected in the “Autostop” settings (see
“Programs” on page 86). Tap and hold this button for 3 sec. to
stop the unit in “Autostop” mode.
If you have selected the closing of the front window in the
Autostop settings (see “Setting up AutoStop” on page 89), you
need to keep the AutoStop button pressed until the move-
ment of the front window stops completely.
The “UV” button switches UV disinfection of the sample chamber
on and off.
Icon Meaning
“Back” button: cycles through all screens previously displayed
(grayed out if on Main Screen).
“Home” icon: returns to the Main Screen.
“Settings” icon: opens the “Settings” screen (see “Settings” on
page 73) with various options for parameter settings.
“Event Log” icon: (see “Event Log” on page 114)