Thermofilm Heatstrip THY2200P, Инструкция по сборке

Страница: 9 / 12

9
Assembly Instructions
CAUTION :
To assemble this heater, you should obtain assistance from another person when handling the
larger, heavier pieces.
7
Install Top Post to the Lower Post
Install the Heater to Bracket Head attached on the Upper Post

Insert and slide the top post over to the lower post connecting
the stand using 8 pan head screws (M6x10mm), then tighten all
screws securely.

Using the 2 brackets, attach the brackets to the heater.

Match the brackets to the slotted holes located on the bracket head shown
in the diagram.

Using 2 Hex nuts bolts, tighten the heater brackets to the bracket head sup-
port securely.

Ensure the heater is centred on the post.
8
Hex Nut M12
QTY: 2
Pan Head Screw M6x10mm
QTY: 8
Tip: Tilt the stand on a chair or a solid non-abrasive surface before
connecting the heater to the bracket head.