2
Mounting options
Rev A Sep 20
The installation of HEATSTRIP
®
Max & Max
-
DC is simple and easy with the standard mounting brackets supplied. For other
more challenging locations there are range of mounting options available
-
refer to below diagrams.
The HEATSTRIP
®
Max & Max
-
DC can be mounted directly to the ceiling, angled downwards on a wall, fitted flush with the
ceiling; suspended on chains or poles; attached to beams or poles; mounted end
-
to
-
end, or 2 units together. Refer to the
following pages for more detailed information on each mounting option.
CEILING
CEILING
TWIN MOUNT
BRACKET
STANDARD
BRACKET
EXTENSION MOUNT
BRACKET
SUSPENSION MOUNT USING
STANDARD BRACKET
BEAM MOUNT USING
STANDARD BRACKET
12" (300mm) MIN.
LIGHT OR SPRINKLER MUST
NOT BE BELOW THE HEATER
CEILING
"A"
LIGHT OR SPRINKLER MUST
NOT BE BELOW THE HEATER
CEILING
15
0m
m
M
IN.
300mm MIN.
BEAM MOUNT
WITH STANDARD BRACKET
CEILING MOUNTING
BEAM MOUNTING
SUSPENSION MOUNTING
WALL MOUNTING
TERMINAL BLOCK
ACTIVE
NEUTRAL
EARTH
ACTIVE
NEUTRAL
EARTH
FIELD WIRING CONNECT
TO TERMINAL BLOCK
INSIDE CONNECTOR BOX
FLUSH MOUNT
ENCLOSURE
CEILING
CEILING
TWIN MOUNT
BRACKET
STANDARD
BRACKET
EXTENSION MOUNT
BRACKET
SUSPENSION MOUNT USING
STANDARD BRACKET
BEAM MOUNT USING
STANDARD BRACKET
LIGHT OR SPRINKLER MUST
NOT BE BELOW THE HEATER
CEILING
FLOOR
SURFACE BELOW HEATER
1
5
0
mm
M
IN
.
150mm MIN.
300mm MIN.
1
0
0
0
mm
M
IN
.
2
1
0
0
mm
M
IN
.
STANDARD MOUNTING BRACKETS
INCLUDED IN BOX
BEAM MOUNT
WITH STANDARD BRACKET
END TO END MOUNTING BRACKET
SUSPENSION MOUNTING
WITH STANDARD BRACKET
EXTENSION MOUNT KIT WITH POLES
TWIN MOUNTING BRACKETS
CEILING MOUNTING
BEAM MOUNTING
SUSPENSION MOUNTING
WALL MOUNTING
100
80
170
FLUSH MOUNT
ENCLOSURE
FLUSH MOUNT ENCLOSURE
