Thermocet Rose 6, Инструкции по эксплуатации и монтажу

Страница: 6 / 12

Page .6
4.4 Fitting the decorative coal effect ( see page 7 )
•
Loosen the two screws on the leftside of the door knob.
•
Open the door and take out the packed ceramic coal set, carefully unpack the coal sets.
•
Place the ceramic coal sets with care. Mount on the front lugs and gentle lean backwards on to the rear
mounting plate; which is about 8 cm above the burner unit.
•
Close the door and fix the two screws. Important: always take care that the door is fixed tight before op-
erating the stove.
•
Now light the stove according to the Operating Instructions.
4.5 Thermostat probe
The stove is supplied with a remote mounting thermostat capaillary probe. The probe should be placed in a
position which will allow it to operate from the temperature of the room not the appliance.
Happy heating!