THERMOBAR AB, SÅÅ 406, 837 97 ÅRE • +46647
-
66 42 04 • [email protected] • THERMOBAR.SE
however. If the light is not on, power is not
reaching the trough. It is possible that the
fuse in the transformer has blown. Press the
button with the small transparent cover on
the transformer to reset.
If this doesn’t help,
check the fuse for the main power supply. If
the residual-current circuit breaker has
blown or if you
can’t find the problem, you
should contact an electrician.
The voltage powering the ThermoBar is low,
24 volts, and completely safe. However, the
current is quite high, 6-8 ampere. This
means that you cannot use a really long low-
voltage cable between the transformer and
the ThermoBar. If you do, the voltage will be
too low when it reaches the ThermoBar. Our
standard cable delivered with your
ThermoBar is 2 metres but you can change
this to 10 metres or 20 metres.
NB! Avoid using a longer cable than you
need as this will lead to a lower water
temperature and higher energy use. If you
are going to lengthen a 24-volt cable, you
must to get an electrician to do it. NEVER
join with a plug intended for a 230-volt cable!
Hold the plug (not the cable) when you pull
out the 24-volt cable, otherwise the cable
might get damaged.
Accessories:
Both ThermoBar 130 and ThermoBar 250
can be fitted with a float valve and heated
hose automatic refilling system. Rojo DN15
is compatible with ThermoBar 130 and Rojo
DN20 is compatible with ThermoBar 250.
The extra power socket can be used for a
ThermoBar LED light. An insulated lid can
be used to save energy if the animals are
inside overnight.
Our products are recyclable, and this is important for ThermoBars sustainability work. When
it has lived its life, recycle your ThermoBar as plastic.
If you have any questions or need any advice, please do not hesitate to contact us at
thermobar.se.
