manualshive.com logo in svg

Thermo 8600 Series, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Thermo 8600 Series Скачать руководство пользователя страница 64

First Aid

If a person seems to become dizzy or loses consciousness while working with liquid nitrogen or carbon dioxide, move to a well-

ventilated area immediately.  If breathing has stopped, apply artificial respiration.  If breathing is difficult, give oxygen.  Call a
physician.  Keep warm and at rest.

If exposed to liquid or cold gas, restore tissue to normal body temperature (98.6° F) as rapidly as possible, followed by protec-

tion of the injured tissue from further damage and infection.  Remove or loosen clothing that may constrict blood circulation to the
frozen area.  Call a physician.  Rapid warming of the affected part is best achieved by using water at 108° F.  Under no circumstance
should the water be over 112° F, nor should the frozen part be rubbed either before or after rewarming.  The patient should neither
smoke nor drink alcohol.

8600 Series  __________________________________________________________________________________Appendix C

C - 1

Содержание 8600 Series


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды