Thermo 49i, Инструкция по эксплуатации, Страница: 229 / 276

C-Link Protocol Commands
Datalogging
Thermo Fisher Scientific Model 49
i
Primary Standard Instruction Manual B-21
set erec format format
set lrec format format
set srec format format
These commands set the output format for long and short records, and
dynamic data, according to
Table B-4 . The example that follows sets the
long record output format to ASCII with text.
Send: set lrec format 1
Receive: set lrec format 1 ok
erec layout
lrec layout
srec layout
These commands reports the layout (string indicating the data formats) for
data that is sent out in response to the erec, lrec, srec, and related commands
The example that follows shows a typical response. For details on how to
interpret the strings, see “Record Layout Definition” later in this appendix.
Send: lrec layout
Receive: lrec layout %s %s %lx %f %f %f %f %f %f %f %f %f %f %f %f
t D L ffffffffffff
flags no nox hino hinox pres pmtt intt rctt convt smplf ozonf pmtv
lrec mem size
srec mem size
These commands report the long and short records that can be stored with
the current settings and the number of blocks reserved for long and short
records. To calculate the number of short records per block, add 2 to the
number of records, and then divide by the number of blocks. The example
that follows shows that 7 blocks were reserved for long records, and the
maximum number of long records that can be stored in memory is 1426.
Send: lrec mem size
Receive: lrec mem size 1426 recs, 7 blocks
Table B-4. Record Output Formats
Format Output Format
0 ASCII no text
1 ASCII with text
2 binary data