Thermo Scientific Vanquish Charger, Руководство по эксплуатации

Страница: 54 / 88

6 • Operation
Page 54 Vanquish Charger Operating Manual
6.6 Shutting Down the Charger
If the Charger will not be operated for a short or longer period of time,
follow the instructions on shutting down the Charger in the following
section.
Shut down the Charger if the autosampler is shut down, too. If the
autosampler is operating, leave the Charger turned on to ensure that
temperature control remains effective.
Shutting Down the Charger
To shut down the Charger, follow the instructions below.
1. Remove the shelf and any samples from the Charger compartment.
2. Turn off the Charger.
3.
(If you plan to interrupt operation for a longer period)
Disconnect the
power cord.
4. Clean the inside of the Charger compartment if necessary (see
section 7.3.2 Cleaning the Charger, page 59 ).
5. Leave the Charger door open.
6. If you want to move the Charger to a new location or if you need to
ship the Charger, follow the instructions in section 7.5 Transporting
or Shipping the Charger, page 62 .
TIP
The Charger door is equipped with a mechanism that opens the door
automatically when the Charger is turned off. The door cannot be closed
while power is off.
Restarting the Charger
To restart the Charger, follow these steps:
1. Reconnect the power cord if necessary and turn on the Charger.
2. Prepare the Charger for operation (see section 6.4 Preparing the
Charger for Operation, page 47 ).