3
•
Installation
Page 8
Solvent Monitor
Installation Guide
3.4
Installing the Solvent Monitor
TIP
If the system stack has not already been set up, install the solvent
monitor before the column compartment because the cables need to be
guided between the system stack and the column compartment.
The recommended position of the solvent monitor is the right side of
the front railing.
Figure 1: Recommended position of the solvent monitor
If a Vanquish Display is also to be installed, refer to the
Vanquish User
Interface Installation Guide
for information where to mount the
Vanquish Display. The instructions below describe how to mount the
solvent monitor at the right side of the front railing.
