Thermo Scientific TriPlus 300, Руководство по предварительной установке

Страница: 25 / 32

1
TriPlus 300 Headspace Site Preparation
Space and Load Requirements
Thermo Scientific TriPlus 300 Headspace Preinstallation Requirements Guide 3
3. Allow at least 30 cm (12 in.) of clearance behind the system.
4. Make sure you have at least 90 cm (3 ft.) of clearance above the system.
5. Make sure your workbench can support a TriPlus 300 Headspace system. Remember,
additional instruments add to the total weight.
6. Ensure that your work area is stable and free of vibration from nearby equipment. The
system is a sensitive instrument.
GC-GC/MS TriPlus 300 Headspace Configuration Space and Mass
Requirements
TriPlus 300 Headspace sampling system must o be installed on the left of the GC-GC/MS
system. The maximum distance from the GC-GC/MS system must considers the length of
the transfer line that connects the TriPlus 300 Headspace sampling system to the GC injector.
Use
Table 3 to determine the space and mass requirements according to your GC-GC/MS
TriPlus 300 Headspace sampling system configuration.
IMPORTANT The measure reported in the tables are rounding-up for excess.
The tables do not include optional instruments e.g. computers, printers, etc. The
GC-GC/MS system should be placed on a workbench that has minimum dimensions of
0.75×2 m (2.5×6 ft.).
Table 2. Space and Load Requirements
Instrument
Depth Width Height Mass
cm in. cm in. cm in. kg lbs
TriPlus 300 Headspace
Main Unit + Autosampler Unit
55 22 82 32 73 29 63 139
TRACE 1300 60 24 44 17 45 18 35 77
TRACE 1310 67 26 44 17 45 18 35 77
TSQ 8000 Series MS 89 35 40 16 45 18 61 135
ISQ Series MS 69 27 36 14 46 18 45 99
DSQ II MS 68 27 38 15 44 17 45 98
ITQ MS 68 27 38 15 44 17 45 98
Computer
1, 2
48 19 20 8 43 17 12 27
Monitor
2
16 7 46 18 32 13 4 8
Keyboard
2
23 9 46 18 50 2 1 2
1
This item is placed on the floor under the system, thereby reducing the weight requirements for your workbench.
2
Dimensions vary per manufacturer, therefore approximations are provided.