Thermo Scientific thermoscientific Vanquish UHPLC System, Руководство по эксплуатации

Страница: 92 / 148

6 • Operation
Page 92 UHPLC System
Operating Manual
6.6 Operating the System from the Software
This section describes the basic steps for operating the Vanquish system
with the Chromeleon software. For additional information, refer to the
Help and documents provided with the software that you are using.
6.6.1 Starting the Instrument Controller and Client
1. Start the Chromeleon Instrument Controller.
Right-click the Chromeleon tray icon on the Windows taskbar (the
icon is crossed out in red) and Click
Start Chromeleon Instrument
Controller . The icon changes to gold, indicating that the Instrument
Controller Service is starting. The icon changes to gray when the
Instrument Controller Service is running (idle).
If the Chromeleon tray icon is not available on the Windows taskbar,
click
Start > All Programs (or Programs , depending on the operating
system) > Thermo Chromeleon 7 > Services Manager > Start
Instrument Controller .
2. Start the Chromeleon 7 client.
Click Start > All Programs (or Programs , depending on the operating
system) > Thermo Chromeleon 7 > Chromeleon 7 .