Thermo Scientific SPECTRONIC 200, Руководство пользователя

Страница: 25 / 44

SPECTRONIC 200E USER GUIDE
Using the Analyzer Mode
Thermo Scientific SPECTRONIC 200E User Guide 23
Use the arrow keys to select and set the value of each factor. Select Enter at the bottom of the
screen to advance to the formula design screen.
Figure 36.
Use the arrow keys to choose characters. Press to select the character and enter it onto
the formula line. Once the formula is complete, go to the NEXT option (navigate to the 7,
press and press ). This completes the analyzer method setup and leads you into the
method save sequence. An on-screen keyboard layout ( Figure 33 ) is used to enter the file
name for the method. After saving the method, the software prompts you as shown in
Figure 37 .
Figure 37.
NOTICE If the SPECTRONIC 200 does not recognize your USB memory device, check
that it is formatted FAT32. Older USB sticks and sticks of less than 2GB may be
formatted FAT16 (usually labeled simply as FAT).