2-2
Magnetic Stirrer
Thermo Scientific
Section 2
Unpacking and Installation
Introduction
Environmental Conditions
The unit should be installed in a suitable environment as described below.
•
Avoid direct sunlight.
•
Room temperature should be 5°C ~ 40°C
•
Relative Humidity (RH%) should be less than 80%.
•
Altitude should be less than 2,000m.
Location Conditions
Place the unit on the bench or table when in use, and keep a proper
distance between it and other apparatuses.
• Do not use the plastic beaker when operating the unit in explosive
atmospheres.
• The plastic beaker can cause the magnetic field, resulting in igniting to
explosive substances.
• Do not place the unit near other laboratory equipment which can be readily
influenced, even by weak motor vibration, or by magnetic force because the
unit create a magnetic field.
Arrangement of Unit
•
Place the unit on the table. Check to make sure the non-slip feet are
secured tightly to the unit.
•
Ensure that the unit will be parallel to the table.
Setting Up Cover Plate on Top Plate
•
Cover silicon pad on top of the top plate for the safety test.
•
Silicon pad cannot be used according to user’s option.
