Thermo Scientific Precision WB159910-33, Руководство пользователя

Страница: 8 / 20

8
The water bath is shipped in a single carton. When
unpacking the unit, check each loose item against the
packing list below. Should a shortage exist, notify your
Thermo Scientific branch or representative, identifying the
part by name and catalog number.
Packing List
Qty Item Supplied
1 Water Bath
1 Cover Assembly
1 Diffuser Tray
1 Thermometer Clip and Grommet
1 Siphon Pump (10, 20, 28, & dual 5/10 only)
1 Instructions
1 Warranty Card
Assembly and Installation
Follow these steps to assemble and install the
water bath before operation:
1. The location must:
• Be indoors.
• Provide an adequate source of power. Check
the label on the back of the unit for voltage and
current requirements.
• Provide adequate clearance to insert samples.
• Be level, fixed, and capable of supporting the
weight of the unit when filled with liquid and
samples.
• Be free of drafts and wide ambient tempera-
ture variations such as near a heater or air con-
ditioning vents.
• Provide a fume hood if hazardous fumes are
anticipated when using the water bath.
• Be convenient to a sink for filling and draining
the water bath.
Unpacking and Installation
Note
If there is shipping damage, keep the
entire shipment intact-retaining the
carton and all packing material-and
file a claim with the final carrier.
Usually the firm will send an investi-
gator to ascertain liability.