Thermo Scientific Nicolet Summit, Руководство пользователя

Страница: 50 / 65

Clean the Spectrometer
Before cleaning theThermo Scientific Nicolet Summit spectrometer, turn it off and disconnect the power
supply.
Clean the Summit Spectrometer
Gently clean the exterior of the instrument with a soft, clean cloth lightly dampened with mild soap.
Dust can collect on the electronics enclosure on the back of the instrument and can potentially interfere
with heat dissipation, which may reduce the lifetime of the electronic components.
To remove dust from the back of the instrument, use compressed air to blow the dust off. Do not use any
liquid when removing dust from the back of the spectrometer.
CAUTION
Avoid shock hazard. To avoid shock hazard, do not allow liquid to run
into the power supply or the back of the instrument.
NOTICE
Do not use harsh detergents, solvents, chemicals, or abrasives; these can damage the finish. Do not
allow liquid to contact any windows in the sample compartment.
NOTICE
Windows can be scratched and ruined very easily. Do not touch or attempt to clean them. Dust will not
affect the signal, but fingerprints can degrade the performance of the instrument and permanently
damage mirrors or windows. If you wish to remove dust from a mirror or window, blow it off with a
gentle stream of clean, dry air or nitrogen. Never allow any liquid to come into contact with a window
or optical component in the instrument.
Thermo Scientific Nicolet Summit LITE FTIR Spectrometer User Guide 47
Maintenance