Thermo Scientific Nicolet iS10, Начало работы, Страница: 13 / 26

Thermo Fisher Scientific Getting Started with an iS10 Spectrometer 9
Next, make sure the sampling accessory is properly installed in the
sample compartment:
If you have… You should…
An ATR accessory Make sure the pressure device, if
included, is not in contact with
the crystal. Clean the crystal with
a soft cloth and, if needed, an
appropriate solvent.
The Smart OMNI-Transmission
Accessory Make sure no samples that would
block the beam are installed in
the accessory.
A DRIFTS accessory Make sure the slider is pushed in
to the second cup (the one closer
to the handle). This positions the
gold disk in the beam.
A specular reflection accessory Place a gold mirror face down on
the accessory.