Thermo Scientific KingFisher Flex Скачать руководство пользователя страница 67

Страница: 67 / 94

Maintenance

Packing for service

Thermo Fisher Scientific

Thermo Scientific KingFisher Flex User Manual 67

4. Disinfect the outside of the instrument using a cloth dampened with

70% ethanol.

5. Place the instrument in a large plastic bag. Ensure that the transparent

lid has been removed.

6. Place a cloth soaked in the prepared solution into the bag. Ensure that

the cloth does not make contact with the instrument.

7. Close the bag firmly and leave the instrument in the bag for at least 24

hours.

8. Remove the instrument from the bag.

9. Clean the instrument using a mild detergent.

10. Remove any stains using 70% ethanol.

11. After performing this decontamination procedure, enclose a signed and

dated Certificate of Decontamination both inside the transport package

and attached to the outside of the package (see Appendix A:
“Certificate of Decontamination”).

To pack for service, follow the guidelines presented below.

Caution

It is important that the instrument is thoroughly decontaminated

before it is removed from the laboratory or any servicing is performed on

it.

When you ship the instrument for service, remember to:



Inform about the use of hazardous materials.



Decontaminate the instrument beforehand.



Install the transport locks.



Place the KingFisher Flex head into its transportation box.



Pack the instrument according to the enclosed packing instructions.



Use the original packaging to ensure that no damage will occur to the

instrument during shipping. Any damage will incur additional labor

charges.



Enclose a dated and signed Certificate of Decontamination (see
Appendix A: “Certificate of Decontamination”) both inside and attached

Packing for

service

Содержание KingFisher Flex































































































Результаты поиска

Содержание KingFisher Flex

Отзывы:

Похожие инструкции для KingFisher Flex

Бренды по названию

Популярные бренды

Thermo Scientific KingFisher Flex, Руководство пользователя

Результаты поиска

Содержание KingFisher Flex

Отзывы:

Похожие инструкции для KingFisher Flex

Бренды по названию

Популярные бренды