Thermo Scientific KingFisher Flex Скачать руководство пользователя страница 63

Страница: 63 / 94

Thermo Fisher Scientific

Thermo Scientific KingFisher Flex User Manual 63

Chapter 5

Maintenance

For reliable daily operation, keep the instrument free of dust and liquid

spills.

Abrasive cleaning agents are not recommended, because they are likely to

damage the paint finish.

It is recommended that you clean the case of the instrument periodically to

maintain its good appearance. A soft cloth dampened in a warm, mild

detergent solution will be sufficient.

Clean the outside of the instrument and the turntable with clean low-

pressure compressed air or a cloth dampened with water or a mild

detergent when necessary.

Although the KingFisher Flex is constructed from high-quality materials,

you must immediately wipe away spilled saline solutions, solvents, acids or

alkaline solutions from outer surfaces to prevent damage.

Caution

Painted surfaces can be cleaned with most laboratory detergents.

Dilute the cleaning agent as recommended by the manufacturer. Do not

expose the surfaces to concentrated acids or concentrated alcohols for

prolonged periods of time as damage may occur.

Clean the display areas with a mild laboratory detergent. The keypad has a

wipe-clean surface.

Plastic covers and surfaces can be cleaned with a mild laboratory

detergent or alcohol.

Warning

If any surfaces are contaminated with biohazardous material, a

mild sterilizing solution should be used.

Caution

Do not autoclave any part of this instrument except the shield

plate.

Keep the turntable surface clean to avoid dust and dirt entering into the

instrument. Clean the turntable surface at least once a week using a soft

cloth or tissue paper soaked in a mild detergent solution (SDS), soap

solution or alcohol.

Regular and

preventive

maintenance

How to clean the

turntable

Содержание KingFisher Flex































































































Результаты поиска

Содержание KingFisher Flex

Отзывы:

Похожие инструкции для KingFisher Flex

Бренды по названию

Популярные бренды

Thermo Scientific KingFisher Flex, Руководство пользователя

Результаты поиска

Содержание KingFisher Flex

Отзывы:

Похожие инструкции для KingFisher Flex

Бренды по названию

Популярные бренды