Thermo Scientific Invitrogen PowerEase Touch PS0120, Руководство пользователя

Страница: 24 / 38

Sleep mode off Sleep mode on
Figure 15 Sleep mode settings
Software update
To update the power supply user interface software perform the following steps:
1.
Insert a USB drive that contains the appropriate software update files into the
USB port on the back of the power supply.
Note:
The USB drive must use FAT32 format and have a maximum capacity of
32 GB.
2.
On the Settings screen, touch Software update (see Figure 14).
The power supply will search for update files on the USB drive. This will take
several seconds.
3.
When the updated software has been found, touch Update on the displayed
screen.
The update may take a couple of minutes to install.
4.
After software installation, the power supply will automatically reboot to the
Home screen.
Chapter 2
Methods
Settings
2
24
PowerEase ™ Touch 120W Power Supply User Guide