background image

 

Thermo 

Fisher 

Scientific 

Warranty 

Warranty 

Seller warrants that the Products will operate or perform substantially in 
conformance with Seller's published specifications and be free from defects 
in material and workmanship, when subjected to normal, proper and 
intended usage by properly trained personnel, for the period of time set 
forth in the product documentation, published specifications or package 
inserts.  If a period of time is not specified in Seller’s product 
documentation, published specifications or package inserts, the warranty 
period shall be one (1) year from the date of shipment to Buyer for 
equipment and ninety (90) days for all other products (the "Warranty 
Period").  Seller agrees during the Warranty Period, to repair or replace, at 
Seller's option, defective Products so as to cause the same to operate in 
substantial conformance with said published specifications; provided that 
(a) Buyer shall promptly notify Seller in writing upon the discovery of any 
defect, which notice shall include the product model and serial number (if 
applicable) and details of the warranty claim; (b) after Seller’s review, Seller 
will provide Buyer with service data and/or a Return Material 
Authorization (“RMA”), which may include biohazard decontamination 
procedures and other product-specific handling instructions; and (c) then, 
if applicable, Buyer may return the defective Products to Seller with all 
costs prepaid by Buyer.  Replacement parts may be new or refurbished, at 
the election of Seller.  All replaced parts shall become the property of Seller.  
Shipment to Buyer of repaired or replacement Products shall be made in 
accordance with the Delivery provisions of the Seller’s Terms and 
Conditions of Sale.  Consumables, including but not limited to lamps, 
fuses, batteries, bulbs and other such expendable items, are expressly 
excluded from the warranty under this warranty.    

Notwithstanding the foregoing, Products supplied by Seller that are 
obtained by Seller from an original manufacturer or third party supplier are 
not warranted by Seller, but Seller agrees to assign to Buyer any warranty 
rights in such Product that Seller may have from the original manufacturer 
or third party supplier, to the extent such assignment is allowed by such 
original manufacturer or third party supplier.   

In no event shall Seller have any obligation to make repairs, replacements 
or corrections required, in whole or in part, as the result of (i) normal wear 
and tear, (ii) accident, disaster or event of force majeure, (iii) misuse, fault 
or negligence of or by Buyer, (iv) use of the Products in a manner for which 
they were not designed, (v) causes external to the Products such as, but not 
limited to, power failure or electrical power surges, (vi) improper storage 

Содержание INNOVA Series




















































































Отзывы: