Thermo Scientific HPS RT2 Advanced Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 55

background image

2-2

Hotplate & Magenetic Stirrer

Thermo Scientific

Section 2

Functional Description

Safety

•

Selection of the Timer Mode - Immediate Activation (T1): The timer
starts immediately after setting the timer, Delayed Activation (T2):
The timer is activated only when the set temperature is reached.

•

Quick Heat Up Time - Ample heating capacity and superb heat
transfer rate of the tightly integrated structure of heater and ceramic-
coated aluminum alloy top plate allow quick heat up time.

•

The ceramic-coated top plate is highly resistant to heat and corrosion.
In addition, its white color is optimal for monitoring color changes of
the media during operation.

•

Hot Top Warning Indicator - The top plate temperature can remain
very hot for some time even after the heater is turned off. To prevent
injury or fire under such circumstances, this instrument has a hot top
warning indicator on the control panel. This indicator will illuminate if
the top plate temperature is over 50°C. Even so, do not rely on this
indicator alone for your safety

•

Overheating prevention device - Basically built in electronic
overheating prevent device and mechanical body overheating prevent
device.

•

Heating plate overheating prevention device - A heating plate
overheating prevention device is particularly built-in.

•

The devices overheat warning function - The devices WARNING LED
will be light. In case of the devices temperature goes over safe range.

•

Error indication regarding external temperature sensor - In case of
Error message, the Probe does not contain enough in media or on air.

•

A transparent shield is also provided to allow you to monitor your
operations more safely by shielding you against decoupled stir bars or
liquid splashes. (Option)

•

Heating Bath (Option) - A specially designed non-slip heating bath
comes with the instrument. To prevent unintentional slips of the bath
during operation, this bath has concavo-convex bottom shown below
so that it can sit stably on top of the top plate.

Features (continued)

«
...
8
9
10
11
12
...
»

Содержание HPS RT2 Advanced
























































Отзывы:

Нет отзывов

Похожие инструкции для HPS RT2 Advanced

Бренд: TC Electronic Страницы: 2

Бренд: Bahco Страницы: 131

Бренд: Bahco Страницы: 126

Бренд: dbx Страницы: 12

Бренд: dbx Страницы: 13

Бренд: dbx Страницы: 72

Бренд: dbx Страницы: 11

Бренд: dbx Страницы: 16

Бренд: J.P. SELECTA Страницы: 32

Бренд: Land Pride Страницы: 36

Skid Steer Rakes SR2672

Бренд: Land Pride Страницы: 2

Бренд: Land Pride Страницы: 2

Disc Harrows DH3510

Бренд: Land Pride Страницы: 2

Бренд: Land Pride Страницы: 4

Бренд: Land Pride Страницы: 4

Straw Crimper CR2572

Бренд: Land Pride Страницы: 16

Бренд: Oakworks Medical Страницы: 28

Бренд: Raytec Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды