Thermo Scientific HistoStar, Руководство оператора

Страница: 121 / 128

Appendices
113
Appendix B - Packing Instructions, Removal from Use and Disposal
If the HistoStar has been used with, or has come into contact with hazardous material,
ensure that the appropriate decontamination procedures have been followed (See World
Health Organization 'Laboratory Biosafety Manual').
To repack the HistoStar:
• Drain all wax from the instrument and wipe away residue using a dry paper towel or a lint-free cloth.
• Allow to the embedding module to cool to ambient temperature.
• Disconnect both units from the Mains power supply and each other.
• Remove loose parts and pack into the accessories box - see Unpacking HistoStar.
• Pack the modules and accessories box by reversing the unpacking instructions - see Unpacking HistoStar.
• Use sticky tape to keep the wax tank lid and base mould storage compartment door from opening during
transit.
• If returning the unit to Thermo Fisher Scientific, ensure that the Product Return Safety Declaration
certificate has been completed and is packed with the shipping documentation - see Safety Information.
• When removing from use for storage, please note and observe the storage conditions - see System
Specification.
• For end of life disposal, follow local regulations. In Europe disposal should be in accordance with WEEE
regulations – see Safety Information.
• The Cold Module contains refrigerant gases which should be recovered prior to final disposal of the
instrument.