manualshive.com logo in svg

Thermo Scientific Heratherm IMC 18, Руководство по эксплуатации

Поделиться
Скачать
Thermo Scientific Heratherm IMC 18 Скачать руководство пользователя страница 20

Installation procedures
Mains connection

5-2

Heratherm  IMC 18

Thermo Scientific

Connection to the power supply source

1. Before connecting the device to the power source, check to see if the power supply voltage 

corresponds with the specifications on the nameplate on the rear of the device. If the voltage (V) 
and current (A) ratings given are not as required, do not connect the device to the power source!

2. Connect the IEC connector to the socket on the rear of the device.

3. Insert the earthed plug [3] of the mains cable in a correctly earthed and fused socket.

4. Make sure the power cord is not subjected to tensile or compressive force.

Power sockets

The socket which the device is connected to is to be fully accessible
when operating the device so as to ensure that the plug can be re-
moved should danger occur!

Condensation

The device should be in the room for a sufficiently long duration be-
fore it is switched on, in order to ensure that it can reach the ambi-
ent temperature. This prevents condensation forming on live
components.

Содержание Heratherm IMC 18









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды