Thermo Scientific Heracell Vios 160i CR, Руководство по эксплуатации

Страница: 67 / 216

4
Start-up
Installing the HEPA Filter and the Water Reservoir Cover Panel
Thermo Scientific
Heracell Vios 160i / 250i CR
4-7
Figure 4-5. Assembling the HEPA Filter and the Airbox
1. Place the HEPA filter (2/ Figure 4-5 ) on a flat surface.
2. Tilt the airbox (1/ Figure 4-5 ) to the left and insert the tabs on the left (3/ Figure 4-5 ) into the
corresponding slots provided in the HEPA filter (4/ Figure 4-5 ).
3. Insert the tabs (5/ Figure 4-5 ) on the right side of the airbox into the HEPA filter catches
(6/ Figure 4-5 ).
4. Place the seal (8/ Figure 4-5 ) into the groove (7/ Figure 4-5 ) provided at the airbox tubing and press
it down evenly.
CLICK
1
2
3
3 4
4
7
8
5
6