Thermo Scientific Heracell Vios 160i CR, Руководство по эксплуатации

Страница: 58 / 216

3
Description of the Device
Water Filling
3-22
Heracell Vios 160i / 250i CR
Thermo Scientific
Shelf System
Figure 3-16. Shelf System Components
The support rails (3/ Figure 3-16 ) of the shelf system are perforated every 42 mm (1.66 inch) so that
the support hooks (2/ Figure 3-16 ) can be inserted variably for any culture container size required. The
shelves (1/ Figure 3-16 ) have an integrated tilt protection and withdrawal stop. Heracell Vios 250i CR
models come equipped with a single-piece bottom insert, as shown on the left side in Figure 3-16 ,
Heracell Vios 160i CR with a cutout for refilling (4/ Figure 3-16 ). For details on using the shelf system,
see “Start-up” on page 4-1 .
For additional instruction when using shelf with sixfold gas tight screen, see Appendix .
Note Operating conditions:

When accessories are to be operated in the workspace of the CO
2
incubator, the environmental
condition requirements must be observed (see table). The energy introduced into the workspace
affects the beginning of the temperature control range. When additional heating sources are
introduced into the workspace, condensation (e.g. at the glass door) may occur.
Introduced energy Beginning of the temperature control range
General Example:

RT* = 21 °C
0 W RT + 3 °C 24 °C
5 W RT + 6.5 °C 27.5 °C
10 W RT + 9.5 °C 30.5 °C
15 W RT + 13 °C 34 °C
20 W RT + 16 °C 37 °C
*RT = Room temperature
1
2
3
4