Thermo Scientific F30400, Инструкция по установке и эксплуатации

Страница: 24 / 70

7
Single Setpoint Models w/OTP
Eurotherm 3216 Controller Operation
22
Large Tabletop Muffle Thermo Scientific
Eurotherm 3216 Controller Operation
The single setpoint model w/OTP furnace controller is a single setpoint controller, which provides a
single digital display to indicate the current chamber temperature or setpoint temperature.
This temperature controller features sensor break protection, self-tuning capability and over
temperature protection (OTP) with an additional OTP relay device.
Basic Operation
When the controller is turned ON it will perform a short self-test and then display a default page. The
measured value (process value) is found in the upper display and the setpoint is found in the lower
display.
Alarm Beacon
Output(s) Status Beacon
"OP1" indicates that the
heating elements are
active
PAGE Button
Unit of Measure
4 Digit
Process Value
(PV) Display
SetPoint (SP)

Display and

Scolling Text
Messages
UP ARROW Button
DOWN ARROW Button SCROLL Button
If at any time you want to return to the HOME DISPLAY, press PAGE button.