Thermo Scientific
MS/ETD System Getting Started Guide
33
5
Performing an ETD Infusion Experiment
This chapter discusses the ETD infusion experiment.
Viewing the Injection Reagent Settings
The parameters on the Reagent page in the Injection Control dialog box (
) regulate
the number of reagent ions admitted into the ion trap of the LTQ XL or LTQ Velos MS
detector
To view the injection reagent ion settings
1. Open the Tune Plus window; see the instructions on
2. Choose
Setup > Injection Control
to open this dialog box (
Figure 21.
Ion Trap page in the Injection Control dialog box
•
Viewing the Injection Reagent Settings
•
Troubleshooting an AGC Target Error
•
Obtaining an ETD Spectrum for Angiotensin I
•