Thermo Scientific Dionex, Руководство оператора

Страница: 57 / 228

3 • SP Sample Preparer Description
Doc. 065250-06 03/2020
45
3.7 Analog Inputs
The main SP electronics board includes four analog inputs. An analog input cable
(P/N 070171) is provided in the SP Ship Kit (SP1, P/N 069085; SP2, P/N 069086)
for connection of an analog input to an external device. If you need more than one
analog input, order additional cables separately.
The input voltage range for each input is 0 to 10 V (maximum). The sampling rate
is 3 Hz and the resolution is 24 bits.
To connect the analog input:
1. Turn off the SP power.
2. Disconnect the power cord.
3. Follow the instructions in Section 10.7 to access the main SP electronics
board.
4. Locate the analog input connectors in the lower-left corner of the main SP
electronics board (see Figure 3-26 ).
Figure 3-26. Main SP Electronics Board: Analog Input Connectors
1
2
3
4
Analog Input 4
Jumper
Analog
Input
Connectors