Thermo Scientific Dionex, Руководство оператора

Страница: 103 / 228

7 • Startup, Operation, and Shutdown
Doc. 065250-06 03/2020
91
Calculate the diluted standard concentration as follows:
Where:
Standard loop = V
1
Dilution volume = V
2
Dilution factor = D
f
Calibration standard concentration = C
1
Diluted standard concentration = C
2
13. Install the loop between ports 1 and 6 of the metering (ME) valve.
Analytical Pump Calibration
Calibrate the analytical pump, if required. Refer to the pump manual for
instructions.
Detector Calibration
Calibrate the detector, if required. Refer to the detector manual for
instructions.
7.2.6 Set Up the Dionex Integral Analyzers in Chromeleon 7 PA
In Chromeleon 7:
•
Create instrument methods and processing methods for each Dionex
Integral
system.
•
Run a standard, and then edit component information for the method.
•
Calibrate the method for the first time. (The method can subsequently
be calibrated in Chromeleon 7 PA.)
2 2 1 1
C V C V

2
1 1
2
V
C V
C

2000
mL 50
L 25
V
V
D
2
1
f
 
μ