Thermo Scientific Dionex ICS-5000, Руководство оператора, Страница: 128 / 482

Dionex ICS-5000 Operator’s Manual
112
Doc. 065342-06 12/11
In Chromeleon 6.8, the raw 3D amperometry data plot can be viewed as either
an Iso or a 3D (wireframe) plot. For both plot types, colors are used to
represent the ranges of response values.
The Iso view is the default view for the 3D raw data. This is a top down view
of the data (imagine you are looking down on the data from above the plot)
(see
Figure 2-58 ). The x-axis is the retention time (min) and the y-axis is the
waveform period (ms). The z-axis, which is represented by different colors in
the plot, is the response (nA).
NOTE
The 3D data shown in Figures 2-58 and 2-59 were collected
using an analytical waveform (see “Analytical vs. Scanning
Waveforms” on page 108 ).
To switch to the 3D plot view, right-click on the Iso plot, select Decoration
and click the Iso/3D Plot tab. The 3D view projects the response values in the
third dimension, which allows you to see the height of responses as well as the
colors representing different magnitudes of detection signal along the z-axis
Figure 2-58. 3D Amperometry Data in Chromeleon 6.8: Iso View
retention time (min)
wavefo
rm tim
e (m
s)
re
sp
on
se
(n
A
)
y
x
z