Thermo Scientific Applied Biosystems GeneChip 645, Руководство пользователя

Страница: 12 / 29

Chapter 1
The Hybridization Oven 645
Using the rotisserie
12
GeneChip
™ Hybridization Oven 645 User Guide
1
Electrical power supply and voltage selection
•
D
etermine the electrical voltage and style of appropriate grounded line cord for
your location.
• On the rear panel of the oven, locate the red 115/230 voltage selector switch
(Figure 7) .
• If the switch is set correctly for your location, no adjustment is necessary. If you
must set the voltage switch, then using a small flat-bladed screwdriver, move the
switch so that “115” or “230” is visible and this number matches the electrical
supply employed in your location.
•
NOTE:
Ovens shipped from the factory have a small label covering the power
entry receptacle, warning the user to select the proper voltage:
• The oven comes equipped with a US NEMA 5-15P style power cord with a
ground pin for use in the Americas. If you are using the oven outside the
Americas, substitute an approved grounded power cord for your location. (For
example, within the EU, employ a “Schuko” style CEE 7/7 grounded cord.)
Figure 6 The rotisserie installed in the oven.
Figure 7 The red 115/230 voltage selector.
WARNING! Voltage selection is factory preset to 230V. Select
the proper voltage for your location before connecting power
cord. Operation with improper voltage selection will damage
the unit.