Thermo Scientific AI 3000, Руководство по эксплуатации

Страница: 94 / 108

5
Maintenance
Current Maintenance
76 AI 3000/AS 3000 Sampling System - Operating Manual Thermo Scientific
Current Maintenance
The AI 3000/AS 3000 II does not generally require maintenance, except emptying of the
waste container when full, cleaning of the sample tray and replacement of the syringe. For any
other operation, contact Thermo Fisher Scientific Technical Service.
Emptying of the Waste Container
1. If necessary, move the turret to have free access to the washing and waste tray.
2. Take out the container.
3. Remove the cap and empty the container.
4. Put on the cap again and reposition the container into its seat.
Cleaning of the Sample Tray Accessory
The sample tray must be periodically cleaned.
Use a water and soap solution or a household non abrasive product. Dry using a clean cloth.
Cleaning the Instrument Externally
Normal usage of the AI 3000/AS 3000 II can cause the exterior to get dirty.
To clean the instrument externally:
1. Power off the AI 3000/AS 3000 II.
2. Externally clean the instrument with a soap and water solution, or with a household
non-abrasive product.
• Pay special attention when cleaning the back side of the instrument. Do not spray,
but clean using a cloth imbued with the same substance.
• Carefully avoid seeping of the products used inside the instrument, particularly when
cleaning the grid of the rear panel.
WARNING It is your responsibility to avoid that dangerous liquids and/or materials
seeping inside the AI 3000/AS 3000 II during operation and maintenance.
Solvent should not be used. Do not spray on electrical parts.