Thermo Scientific Agilent 1200 Series, Руководство по подключению

Страница: 55 / 58

7
Vial and Well Locations for the Available Tray Types
96-Well Plates or 96-Deep Well Plates
Thermo Scientific Agilent 1200 Series Getting Connected Guide for LC Devices 43
96-Well Plates or 96-Deep Well Plates
You can load two 96-well plates or 96-deep well plates into the autosampler’s tray
compartment. The Xcalibur data system recognizes these plates as the front and back well
plates.
Figure 31 shows the well locations with the factory default setting of Left/Back for the plate
rotation. When you create a sequence, you can type a well location from 1:A1 to 1:H12 for
the front well plate, from 2:A1 to 2:H12 for the back well plate, and from 3:A1 to 3:J1 for the
vials.
If you turn on the wash option for an instrument method, you can specify a well location
from 1:A1 to 2:H12 or a reservoir location from 1 to 10.
Figure 31. Two 96-well plates and one vial column with Left/Back for the plate rotation selection
1 12
Injection port
A
B
C
D
E
F
G
H
I
J
Plate 1
Plate 2
Plate 3 (10 × 2 mL vials)
Columns
Row 8
Row 1
H
A
Row 8
Row 1
H
A
Row 1
Row 10
2:A1
1:A1
Column 1
(sequence location = 3:A1)
(wash vial location = 1)