![Thermo Scientific Accela UV/Vis Plus Скачать руководство пользователя страница 42](http://html1.mh-extra.com/html/thermo-scientific/accela-uv-vis-plus/accela-uv-vis-plus_hardware-manual_1105370042.webp)
2
Installation
Making the Back Panel Connections
26
Accela UV/Vis Detector Hardware Manual
Thermo Scientific
Connecting to the Data System Computer
To make the Ethernet connections, use the CAT5, 7 ft long, shielded Ethernet cables supplied
in the accessory kit. These cables have ferrite clamps for additional shielding.
To connect the UV/Vis detector to the data system computer
1. Plug one end of an Ethernet cable into the Ethernet port on the back panel of the
UV/Vis detector and plug the other end of the cable into the Ethernet switch (
2. Connect the Ethernet switch to the data system computer with a supplied Ethernet cable.
Figure 33.
Ethernet connections
U
S
B
ENET
Solvent platform
Accela UV/Vis
Detector
Accela
Autosampler
Accela pump
Computer
Ethernet
switch
Ethernet port
8-pin receptacle for the
interconnect cable
CAT5 shielded
Ethernet cables
USB cable
Содержание Accela UV/Vis Plus
Страница 1: ...Thermo Accela UV Vis Plus Detector Hardware Manual 60257 97005 Revision C December 2013 ...
Страница 16: ......
Страница 54: ......
Страница 86: ......