Thermo Scientific Accela 1250, Руководство по оборудованию

Страница: 126 / 170

5
Maintenance
Replacing the Secondary Piston Seals
102 Accela 600 and 1250 Pump Hardware Manual Thermo Scientific
7. Carefully slide the piston guide bushing over the piston and align the piston wash tubes
so that they face away from the holding hook (see Figure 103 ).
Figure 103. Proper alignment of the piston wash tubes
8. Gently push the new secondary piston seal into its groove by pushing the guide bushing
up toward the end of the holding hook (see Figure 104 ).
Figure 104. Holding hook/piston/guide bushing assembly
9. Repeat step 5 through step 8 for the remaining secondary piston seal.
10. Reassemble the LDA (see “Reassembling the LDA” on page 89 ).
11. Reattach the LDA to the pump (see “Reattaching the LDA to the Pump” on page 92 ).
Piston wash
tubes