Thermo Scientific 7450, Руководство по эксплуатации и техническому обслуживанию

Страница: 32 / 120

The vial sample holder secures a vial for insertion through the access port
on the top of the IVF freezer. This holder may also be used to hold the
external sample probe. See Figure 2-5.
1. To secure the vial, first make sure the
holder is in an upright (vertical)
position.
2. Press the button on the top of the
holder. This temporarily widens the
opening at the bottom of the holder to
install the vial.
3. Carefully let the button up on the top
of the holder while making sure the
vial fits into the indentation of the
holder. The vial should be secure in
the holder when the button is released.
4. If the holder is securing the sample
probe vial (hole in vial cap), slide the
probe down through the holder until
it feeds through the vial cap.
5. Install the other end of the probe to the external connection on the top
of the unit. See Figure 1-2.
The straw sample holder secures up to 4 straws for insertion through the
access port on the top of the IVF freezer. The straw holder may also be
used to hold the external sample probe. See Figure 2-6.
1. To secure the straws, first make sure the holder is in an upright
(vertical) position.
2. Press the button on the top of the holder. This temporarily widens the
opening at the bottom of the holder to install the straws.
3. Carefully let the button up on the top of the holder while making sure
each straw fits into an indentation of the holder. The straws should be
secure in the holder when the button is released.
4. To install the straw probe, insert the probe down the center of the
button indicated below. Slide the probe down through the holder until
it feeds through the center straw.
7007452 CryoMed Freezer 2-19 Thermo Scientific
Section 2
Set-Up and Operation
Using a Vial Holder
Figure 2-5. Vial Holder
Using the Straw Holder