Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 108 / 330

Operation
Diagnostics Menu
3-54 Model 5028
i
Instruction Manual Thermo Fisher Scientific
I/O BOARD VOLTAGES:
3.3 SUPPLY 3.3 V
5.0 SUPPLY 5.0 V
24.0 SUPPLY 24.0 V
-3.3 SUPPLY -3.3 V
RANGE AVG DIAGS ALARM
The Detector Board screen (read only) is used to display the voltage
readings on the measurement interface board.
l
In the Main Menu, choose Diagnostics > Voltages >
Detector
Board .
DETECTOR BOARD:
5.0 SUPPLY 5.0 V
RANGE AVG DIAGS ALARM
The RH/Temperature screen (read only) displays the current relative
humidity and temperature readings. The board temperature is the air
temperature measured by a sensor located on the measurement interface
board.
l
In the Main Menu, choose Diagnostics > RH/Temperature .
RH/TEMPERATURES:
>AMBIENT RH 40.0 %
SAMPLE RH 36.4 %
SAMPLE RH B 36.4 %
AMBIENT TEMP 22.9
FLOW TEMP 23.9
FLOW TEMP B 23.9
o
C
BOARD TEMP 24.9
RANGE AVG DIAGS ALARM
o
C
o
C
o
C
The Pressure/Vacuum screen (read only) displays the current pressure
readings. The pressure is measured by a pressure transducer. The vacuum
is the amount of vacuum under the filter tape. The flow pressure is the
pressure differential across the orifice.
l
In the Main Menu, choose Diagnostics >
Pressure/Vacuum
.
Detector Board Voltages
RH/Temperature
Pressure/Vacuum