Thermo Scientific 4625, Руководство по эксплуатации

Страница: 10 / 15

Starting/Stopping the Shaker
• For continuous shaking action, push the selector
switch to the CONSTANT position.
• In the event a timed period of shaking is
desired, push selector switch to TIMED. Next,
turn the black arrow on the timer dial to the set-
ting corresponding to desired timing period.
Press center button on timer to start the timing
period. The shaker shuts off automatically at
the end of the timed cycle. During the cycle the
white dot on the dial will rotate to indicate
elapsed time.
• During either the CONSTANT or TIMED shaking
periods, the operator can stop the shaker by
simply pushing selector switch to the center or
OFF position.
Setting the Speed Control
• After starting the shaker, turn the speed control
clockwise to the desired level of shaking action.
• It is not necessary to return the speed control to
the start or zero position after completion of
each shaking cycle. Once a satisfactory shak-
ing speed is found, the control may be left at
that setting.
• To stop the shaker, turn the switch to OFF.
• If the shaker will not be used again soon, dis-
connect the plug from its electrical outlet.
Power Mains Protection
If a fuse or circuit breaker blows, have a qualified person
replace them with a properly rated fuse or circuit breaker.
See Replacement Parts section of this manual.
10
O
PERATION
Note
If the equipment is used in a manner
not specified by the manufacturer,
the protection provided by the equip-
ment may be impared.