Drawers
Thermo Fisher Scientific
Laboratory and Plasma Freezers
19
11 Drawers
11.1 Removing the
Drawers
Larger models
To remove the drawers in 23 ft
3
and larger models, complete the following
steps (refer to Figure 4):
1.
Pull the drawer toward you until the slides are fully extended.
2.
Lift the back of the drawer to disengage the mounting tabs from the
slots on the slides.
Note
: The drawers fit snugly between the slides. Push the back of the
drawer from underneath to remove the drawer.
3.
Raise the back of the drawer almost to a vertical position and disengage
the front mounting clips from the slides.
5 and 12 Cu. Ft. models
To remove the drawers on 5 and 12 cu.ft. models, depress the hooks located
on both sides of the drawers (about 1/3 of the way back) and slide the
drawers up and out.
Figure 4.
Drawer Removal (Upright Models)
Tabs
Drawer slide
Slot
