Thermo Scientific 3051 Series, Руководство по эксплуатации и список запасных частей

Страница: 12 / 30

Precision Standard Oven 3-1 Thermo Scientific
Section 3
Installation
The oven requires an area approximately 2 ft. x 2 ft. Two inch air clearance
on all sides (6” if combustible materials) and a minimum of 24” air
clearance on top is needed to allow heat dissipation and prevent
temperature build-ups. The bench selected must be capable of supporting
at least 120 lbs. for small ovens, 130 lbs. for medium ovens, or 135 lbs. for
large ovens. Proper electrical power must be available. Locate the oven so
that no extension cord is required.
Note If the equipment is not used in a manner specified by manufacturer,
the protection provided by the equipment may be impaired.
s
Warning Do not use top of oven as a shelf.
s
Do not cover oven vent hole.
Keep combustible materials away from oven vent hole.
Warning Hot surface! Oven vent and exiting air are hot. Keep hands away.
Thermo Scientific Precision ovens are shipped in a single carton. After
unpacking, locate each item shown in the list below. Report any missing
items, by name and part number, to your Thermo Scientific distributor. In
the event of shipping damage, retain the shipping material and file a claim
with the final carrier.
Item
Shelves - Two provided (one fixed, one moveable)
Shelf Supports - Four provided
Unpacking