Disassembly and Reassembly
58
Figure 93: Heat Compressor Body
4. Place the crankshaft (at room temperature or
cooler) in the compressor body. Carefully line
up the crankshaft assembly but without the
cool crankshaft assembly making contact with
the hot body as shown in Figure 95. Then
quickly position the cool crankshaft assembly
into contact with the shoulder in the bearing
bore of the hot compressor body. Leave a few
moments and the heat will exchange between
the compressor body and crankshaft, and the
bearing will become thermally fixed in the
bearing bore.
Figure 95: Installing Crankshaft
Figure 96: Crankshaft Installed
With Bearing Fully Seated
1.
Check Temperature In These Three Places
Figure 94: Check Temperature
Of Area Around Bearing
1
1
