Disassembly and Reassembly
45
Installation
1. Early style compressor body with groove for
oil pickup tube O-ring in the oil intake hole—
Apply refrigerant oil to the O-ring and place it
in this groove. Insert the pickup tube.
1. Later style compressor body with groove for
oil pickup tube O-ring in the oil intake hole—
Apply refrigerant oil to the O-ring and place it
on the pickup tube. Push the pickup tube into
the oil intake hole in the compressor body
until it bottoms out. The flange on the pickup
tube will force the O-ring into the oil intake
hole.
2. Hold the mounting bracket in place and install
and torque the mounting bracket bolts. See
“Torque Values” on page 24.
3. Apply refrigerant oil to the sump gasket and
place it on the compressor body. The gasket
fits properly in only one position.
4. Install the oil sump. Install the oil sump bolts
and washers. Torque the oil sump bolts in two
steps using a criss-cross pattern. See “Torque
Values” on page 24.
1.
Oil Pickup Tube
2.
O-ring
Figure 56: Early Style Pickup Tube Installation
1.
Oil Pickup Tube
2.
Flange
3.
O-ring
Figure 57: Later Style Pickup Tube Installation
1
2
ARC012
1
2
3
ARC013
1.
Mounting Bracket
2.
Oil Pickup Tube
Figure 58: Pickup Tube Installation
2
1
AGA553