7
Safety Precautions
Thermo King recommends all services be performed by a
Thermo King dealer. However, there are several general safety
practices you should be aware of:
DANGER: Always turn the TriPac Main Power
On/Off Key on the HMI Controller OFF while
refueling the truck. Fuel vapors could ignite if they
come in contact with TriPac electrical or heater
components.
WARNING: Always wear goggles or safety glasses
when working with or around the air conditioning
system or battery. Refrigerant or battery acid can
cause permanent damage if it comes in contact with
your eyes.
WARNING: Keep hands and loose clothing clear of
fans and belts at all times when the unit is operating
or when opening or closing compressor service
valves.
WARNING: Exposed coil fins can cause painful
lacerations. Service work on the evaporator or
condenser coils is best left to a certified Thermo King
technician.
CAUTION: Use extreme caution when drilling holes
in the unit. Drilling into electrical wiring or
refrigerant lines could cause a fire. Never drill into
structural components.
WARNING: Turn the unit HMI Controller Main
Power key to Off before opening the APU or
inspecting any part of the unit.
Содержание TriPac
