Thermo King SR-2 SmartReefer2, Руководство по диагностике

Страница: 174 / 431

Section 4 – SR-2 Operation
USING THE GUARDED ACCESS MENU
The Guarded Access Menu contains menus that allow the technician to check and change the unit’s
programmable features. These features are detailed in Section 3 of this manual. Service Procedure A02A
explains how to read and record the programmable feature settings. Service Procedure A04A explains how to
set the programmable features.
The Guarded Access Menu is entered from the Maintenance Menu. The unit must not be running in order to
enter the Guarded Access Menu.
NOTE – If the unit is running select Interface Board Test from the Maintenance Menu. This will shut the unit
down. Press the EXIT key to return to the Maintenance Menu and continue scrolling to the end of the menu as is
required to enter the Guarded Access Menu.
To enter the Maintenance Menu from the Standard Display press the MENU key.
OFF
ON
MENU
35
°F
35
CYCLE SENTRY
SET SENSORS GAUGES
POINT
.8
The Maintenance Menu is accessed from the first Main Menu screen that appears; either the Language Display
or the Alarms Display. The Alarms Display is shown here. Press and hold both the unlabelled soft key and the
Exit key for 5 seconds.
OFF
ON
MAIN MENU
ALARMS
NEXT EXIT SELECT
4-76
31 January 2005