Thermo King 098916, Руководство по обслуживанию

Страница: 103 / 196

Operating Instructions
102
Recorder Setup
Once the recorder is installed, it needs to be added
to the unit configuration. Connect unit to main
power and turn ON.
NOTE: Software version 01122300 or above is
required to add the electronic recorder.
Flashload software as necessary
1. Press the
U
P
or
D
OWN
key to enter menu area.
2. Scroll up or down to [CONFIGURATION]
menu. Press
F4
to enter menu.
3. Scroll up or down to find [CHART R NOT
PRESENT] (below is only an example of
where item is located).
4. Press the
F4
to select [CHART R. NOT
PRESENT].
5. Enter password. Password is A
NOTE: To enter password: Press
F2
key, press A
key, press
F4
key, press
EXIT
key.
6. Scroll up or down to select chart type being
used. Press and hold
F4
for 5 seconds.
Chart Types Available
+25/ -25 C 31-day
+25 / -30 C 31-day
+80 / -20 F 31-day
+20 / -40 C 31-day
7. Controller will now enter [AUTO CONFIG]
test as unit configuration has been changed.
8. Setup is complete upon completion of [AUTO
CONFIG] test.
Using Special Features
An operator can create a new chart from any date
range of data recorded in the datalogger. This is
extremely valuable if:
• The original chart is missing
• The original chart has been damaged
Procedure for Redraw Chart
1. Install new temperature chart in recorder
2. Press the U
P
or D
OWN
key to enter menu area
3. Scroll up or down to [DATALOGGER] menu.
Press the F4 to enter menu
4. Scroll up or down to [SET LOG TIME]
5. Press the
F4
key and the following menu will
appear.
6. Scroll up or down to place cursor on
[REDRAW FROM] line. Press the F4 .
7. Date information will now be blank. Select
date to start record. After entering, press the
F4
and EXIT.
NOTE: Date format: YY.MM.DD
8. Scroll down to place cursor on [REDRAW
TO] line. Press the
F4
.
Main Menu
Configuration
2002.01.15-12:35
COND TYPE 1/2HP FAN
USDA TYPE 3 PT100
CHART R. NOT PRESENT
AUTO CONFIG OFF
DATALOGGER
SET LOG TIME
2002.01.15-12:35
LOG CHART 1 HOUR
CHART RECORD RET
CHART STATE ONLINE
CHART CDM ONLINE
REDRAW FROM 02.01.15
REDRAW TO 02.01.15