Thermo Electron Savant SC250 Express, Инструкция по эксплуатации

Страница: 16 / 18

16
APPENDIX 1 MAINTENANCE & SERVICE
Maintaining a clean instrument is crucial for dependable results. Clean spills
immediately. Build-up of dried solvents can impair rotor from rotation.
Periodic cleaning of chamber is recommended. Use a detergent solution on
a sponge or gauze to thoroughly wipe the chamber dry. Do not lubricate the
O-ring. Make sure the chamber seal (cover O-ring) is clean.
SUMAX400 MAINTENANCE:
Every two weeks or dependent upon usage, please
execute the following steps
„
Obtain Phillips head screwdriver
„
Insure that gloves and safety glasses are being worn
„
Using Phillips head screwdriver remove the three screws that secure
the SUMAX400 (place screws in a safe place)
„
Remove the SUMAX400 by lifting it straight up, using the rotor hold
down knob
„
Place the SUMAX400 in a plastic container
„
Rinse the SUMAX400 thoroughly under running tap water to rid of all
debris and residue
„
Wipe the inside of the SpeedVac
®
Concentrator with a damp paper
towel
„
Wipe the SUMAX400 dry with a paper towel
„
Properly dispose of the collected water and paper towels into specially
designated containers
„
Return the SUMAX400 to its original position inside the concentrator
chamber, align holes of SUMAX400 with threaded holes in chamber
„
Reinstall the 3 screws into the thread holes
„
Tighten the 3 screws securely
„
Tighten the rotor hold down knob firmly
If you encounter difficulties with this procedure, please contact Thermo.